Conductive Adhesive

Click to Zoom

Get Best Quote

Approx. 7,895 / kg Get Latest Price

Graphite Conductive Adhesive: It is a solvent based graphite conductive adhesive designed to bond wood, leather and some of plastic electronic equipment housings. It is a primer less adhesive requiring only minimal surface cleaning of the substrates to be bonded.

Features 

• Primer less application
• Low cost choice for most of the substrates  
• Fast setting and curing
• Excellent environmental resistance
• Provide corrosion resistance

• To ensure good bonding, surface preparation is required. 

• Adhesive is to be stirred well prior to use.
• Apply bit of adhesive over the substrates, Place mating substrates into the adhesive.
• Do not mate substrates over adhesive which is too dry to transfer.
• Leave it for 24 hours to cure.
• Use enough material to completely fill the gap.
• Use with adequate ventilation.
• Avoid prolonged contact with skin. If contact with skin occurs, wash affected area immediately with soap and water.
• Avoid prolonged breathing of vapor.

• Dangerous if swallowed- Do not consume.

Click to Zoom

Get Best Quote

Approx. 4,500 / Bottle Get Latest Price

Silver-filled Conductive Adhesive is an epoxy-based conductive adhesive that uses nanosilver filler to generate electrical connections between two components. It is a two-component system. The conductive material is silver.

Features

• Two-component system
• Cost-effective
• Superior shielding over a wide frequency range.
• Good abrasion resistance
• Excellent environmental resistance

General Instructions

• To ensure good bonding, surface preparation is required.
• Adhesive and Activator is to be stirred well prior to use.
• Mix thoroughly adhesive and activator in a 1:1 ratio.
• Apply a bit of adhesive over the substrates, Place mating substrates on the adhesive.
• Do not mate substrates over adhesive which is too dry to transfer.
• Leave it for 24 hours to cure.
• Use enough material to completely fill the gap.
• Use with adequate ventilation.
• Avoid prolonged contact with skin. If contact with skin occurs, wash the affected area immediately with soap and water.
• Avoid prolonged breathing of vapour
• Dangerous if swallowed- Do not consume.